Custom DTF Transfer

🖼 Format accepted: PNG only
🧩 Transparent background required
📏 Resolution: 300 DPI
📐 Minimum line thickness: 0,025 in
📦 Files must be prepared at true size (1:1 scale), without resizing or distortion
🔄 Files must not be mirrored and must be clearly readable
⚠️ We only accept designs exactly as submitted — please double-check everything before sending.
⚠️ Avoid pixelated or low-resolution graphics, as this will directly affect print quality.
⚠️ Semi-transparent or fading effects are not automatically supported. If needed, please mention it in your order notes — a white underbase will be applied where required.
📩 If you have any questions, feel free to contact us: info@printivo.ca

👕  100% cotton
🧶  Cotton/polyester blends
🧥  Polyester
🪡  Nylon
🤸  Lycra
📦  Cardboard

⚠️ Printing is carried out in CMYK color mode: exact Pantone matching cannot be guaranteed.

Color shades may vary on repeat orders over time.

Printed colors may differ from what you see on your screen or monitor.

Files are printed exactly as submitted.

We strive to achieve the highest possible color accuracy in DTF printing. However, in DTF printing, slight variations in color shades may occur due to the nature of the process. We appreciate your understanding and remain ready to address any concerns.

🚚 We aim to dispatch orders as quickly as possible based on the estimated production times listed for each product. Please note that these timelines refer to when your order leaves our facility in Montreal, Quebec, and not the final delivery date. Delivery times vary depending on your location and the shipping carrier you choose.

📦 If you experience any issues with your order or have any questions, feel free to contact us — we’re here to help promptly. We offer reprints in cases of manufacturing defects, but not for issues related to customer-supplied files. If you encounter peeling problems, we may request that the transfers be returned for testing to determine the cause.

🧵 Preparing Fabric and Transfer
DTF transfers work on cotton, polyester, and blended fabrics. Before applying, make sure the fabric is clean, dry, and flat — wrinkles, dirt, or moisture can affect the result. Pre-press the fabric for 5 seconds to remove moisture. Place the transfer carefully so it doesn’t move during pressing.

🔥 Press Setup and Application
Preheat the heat press to 300–320 °F and set firm pressure. Pressing time is usually 15–20 seconds, depending on fabric thickness and the press model. Do not move the transfer while pressing, and peel the backing off immediately while it’s still hot.

✨ Simplicity and Reliability
With PRINTIVO DTF transfers, the application process is simple and predictable. Prints are vibrant, full-color, and long-lasting — no need to worry about quality, every transfer is ready for perfect application.

Watch the Video Tutorial